Conferences

[accordion] [panel title=”Conferences/Workshop Organizer”]
  1. IUTAM Symposium SYFSO12 on Integrated Computational Structure-Material Modelling of Deformation and Failure under Extreme Conditions, Baltimore, MD, June 2016.
  2. ARO sponsored workshop on Challenges in Integrated Computational Structure-Material Modeling of High Strain-Rate Deformation and Failure in Heterogeneous Materials, Johns Hopkins University, Baltimore, MD, September 2013, Workshop Chair and Organizer.
  3. 22nd International Workshop on Computational Mechanics of Materials (IWCMM-XXII), Workshop Chair and Organizer.
  4. AFOSR sponsored workshop on Multiscale, Multiphysics Analysis & Design for Multifunctional Applications (MMADMA), Westin Hotel, Arlington, VA, May 2011, Workshop Chair and Organizer.
  5. NSF sponsored workshop on Challenges in Computational Multiscale Materials Modeling (CCMMM), Westin Hotel, Arlington, VA, May 2011, Workshop Chair and Organizer.
  6. 10th US National Congress of Computational Mechanics, Columbus, Ohio, July 2009, Conference Chair and Organizer.
  7. Microstructure Simulation and Mesh Generation for FE Analysis, Ohio State University, December 6-7, 2007, Workshop Organizer (with A.D. Rollet and A. Geltmacher).
  8. NUMIFORM 2004: Numerical Methods in Industrial Forming Processes, The Ohio State University, June 2004, Conference Chair and Organizer.
  9. ARO Workshop on Analysis and Design of New Engineered Materials and Systems with Applications, The Ohio State University, February 5-6, 2002, Workshop Organizer.
  10. The Integration of Material, Process and Product Design, Seven Springs, Mountain Resort, PA, October 19-20, 1998, Conference Co-Organizer (with N. Zabaras, L. Lalli, R. Becker).
[/panel] [panel title=”Conference Scientific/Advisory Committees”]
  1. EMI 2016 Conference & Probabilistic Mechanics & Reliability 2016 Conference, Vanderbilt University, Nashville, TN, May 22-25, 2016, International Scientific Committee.
  2. Gordon Research Conference on Multifunctional Materials & Structures: The Science of Autonomic, Adaptive and Self-Sustaining Systems, Ventura, CA, January 31-February 5, 2016, Advisory Committee.
  3. PANACM 2015: 1st. Pan-American Congress on Computational Mechanics, Buenos Aires, Argentina, April 27-29, 2015, International Scientific Committee.
  4. UNCECOMP 2015: 1st. International Conference on Uncertainty Quantification in Computational Sciences and Engineering, Crete Island, Greece, 25-27 May 2015, International Scientific Committee.
  5. 5th International Congress on Computational Mechanics and Simulation (ICCMS 2014), CSIR-Structural Engineering Research Centre (CSIR-SERC), Chennai, India, December 10-13, 2014, International Scientific Advisory Committee.
  6. 24th International Workshop on Computational Mechanics of Materials (IWCMM 24), IMDEA Materials Institute, Getafe, Madrid, October 1-3, 2014, International Organizing Committee.
  7. 7th International Conference on Multiscale Materials Modeling (MMM2014), Berkeley, CA, October 6-10, 2014, International Advisory Committee.
  8. 2nd Mach Conference, Annapolis, MD, April 9-11, 2014, Scientific Committee.
  9. 23rd International Workshop on Computational Mechanics of Materials (IWCMM 23), National University of Singapore, Singapore, October 2-5 2013, International Organizing Committee.
  10. 2013 Engineering Mechanics Institute Conference of American Society of Civil Engineers (EMI 2013), Northwestern University, Evanston, IL, August 4-7, 2013, Scientific Committee.
  11. 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh, North Carolina, July 22-25, 2013, USACM Executive Council and Steering Committee.
  12. 2013 Engineering Mechanics Institute Conference of American Society of Civil Engineers (EMI 2013), Northwestern University, Evanston, IL, August 4-7, 2013, Scientific Committee.
  13. 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013,Institute of Metal Research, Shenyang, China, July 6-10, 2013, Steering Committee.
  14. 4th International Congress on Computational Mechanics and Simulation (ICCMS 2012),Indian Institute of Technology Hyderabad, India, December 10-12, 2012, International Scientific Committee.
  15. 6th International Conference on Multiscale Materials Modeling, Singapore, October  2012, International Advisory Board and Steering Committee.
  16. 5th International Conference on Multiscale Materials Modeling, Freiburg/Germany, October  2010, International Advisory Board.
  17. 9th US National Congress of Computational Mechanics, San Francisco, CA, July 2007, Technical Committee member.
  18. ICTACEM 2004: Third International Congress on Theoretical, Applied, Computational and Experimental Mechanics, Indian Institute of Technology, Kharagpur, December 2004, Technical Committee Co-Chair.
  19. International Congress on Computational Mechanics and Simulation, Indian Institute of Technology, Kanpur, December 2004, Member of International Advisory Committee.
  20. Mesoscale Mechanics of Heterogeneous Materials, University of Alborg, Denmark, August 2002, Member of the Scientific Committee.
  21. ICES’02  International Conference on Computational Engineering & Sciences, Reno, Nevada, July-August 2002, Member of the Scientific Program Committee.
  22. USNCCM VI Sixth U.S.  National Congress on Computational Mechanics, Dearborn, Michigan, August 2001, Member of the Scientific Committee.
  23. ICES’01  International Conference on Computational Engineering & Sciences, Puerto Vallarta, Mexico, August 2001, Member of the Scientific Program Committee .
  24. 2nd International Conference on Theoretical, Computational and Experimental Mechanics“, Indian Institute of Technology, Kharagpur, December 2001, Member of the International Advisory Committee.
  25. 5th International Conference on the Technology of Plasticity, Columbus OH, October 1996, Member of the Organizing Committee.
[/panel] [panel title=”Mini-Symposia Organizer”]
  1. Hierarchical and Multiscale Methods for Simulation Based Design of Materials, EMI 2017: Engineering Mechanics Institute Conference, San Diego, CA, June 4-7, 2017, (with A. Masud).
  2. Fundamental Methods for Integrating Microstructure-Property-Design Relationships into the ICME Paradigm- Microstructure Characterization and Representation, TMS 2015 144th Annual Meeting & Exhibition, Orlando, FL, March 15-19, 2015 (with C. Woodward).
  3. High-Performance Aerospace Alloys Design Uisng ICME Approach, TMS 2015 144th Annual Meeting & Exhibition, Orlando, FL, March 15-19, 2015 (with A. Pandey and D. Li).
  4. Integrated Computational Materials Engineering-ICME, 11th. World Congress on Computational Mechanics (WCCM2014), July 2014, (with G. Laschet, J.Llorca, E. A. Holm and M. Chiumenti).
  5. Homogenization and Coarse-Graining Methods for Heterogeneous Solids, US National Congress on Theoretical and Applied Mechanics (USNCTAM), June 2014 (with D. M. Kochmann).
  6. Microstructural Effects in Plasticity, Plasticity ’10, St. Kitts Island, January 2010, (with Elizabeth Holm).
  7. Modeling Issues and Computational Methodologies of Virtual Polycrystals, 10th US National Congress of Computational Mechanics, Columbus, Ohio, July 2009, (with P. R. Dawson and P. Young).
  8. Nonlocal Methods and Length Scale Effects,ASME International Mechanical Engineering Congress and Exposition, Boston, Ma, November 2008, (with F. Bobaru).
  9. Processing and Engineering Applications of Novel Materials,ASME International Mechanical Engineering Congress and Exposition, Seattle, Wa, November 2007, (Track Co-Chair: with E. Sancaktar, D. Siginer, J. Liburdy, R. Koganti).
  10. Spatial and/or Temporal Multi-scale Modeling of Materials,  9th US National Congress of Computational Mechanics, San Francisco, CA, July 2007.
  11. Multi-Scale Simulations and Experiments in Materials Processes,ASME International Mechanical Engineering Congress and Exposition, Chicago, ILL, November 2006, (co-organizer: M. Li, A. Maniatty).
  12. Advances and Applications of Multiscale Modeling and Analysis Methods, 7th World Congress  of Computational Mechanics: WCCM, Los Angeles, CA, July 2006, (co-organizer: K. Terada).
  13. Modeling Microscale Material Behavior with Experimental Integration, 7th World Congress  of Computational Mechanics: WCCM, Los Angeles, CA, July 2006, (co-organizer: P. Dawson).
  14. Advances in Computing the Dynamic Behavior of Heterogeneous Materials, 7th World Congress  of Computational Mechanics: WCCM, Los Angeles, CA, July 2006, (co-organizer: F. Bobaru).
  15. Multi-Scale Problems and Related Computational Methods, International Workshops on Advances in Computational Mechanics: IWACOM, Hosei University, Tokyo, Japan, November 2004, (co-organizer: K. Terada, T. Yamada).
  16. Multi-Scale Computational Methods for Composite Materials And Structures, 6th World Congress of Computational Mechanics, WCCM VI, Beijing, China, September 2004, (co-organizer: K. Terada).
  17. Multi-scale Material Modeling, 7th US National Congress of Computational Mechanics, Albuquerque, NM, July 2003.
  18. Material Modeling at Various Length Scales, International Conference on Computational Engineering and Sciences, Reno, Nevada, July-August 2002.
  19. Second Symposium on Computational Modeling of Multiscale Phenomena: Multiscale 2002, Petropolis, Brazil, August 2002. (Co-organizer: G. Paulino).
  20. Arthur Leissa 70th Birthday Symposium, US National Congress of Theoretical and Applied Mechanics, Virginia Tech and State University, June, 2002. (co-organizer S.E. Bechtel and A. Noor).
  21. Computational Materials Modeling, International Conference on Computational Engineering and Sciences, Puerto Vallarta, Mexico August 2001.
  22. Computational Methods in Advanced Materials Modeling and Micromechanics, International Conference on Computational Engineering & Sciences, Atlanta, GA, October 1998.
  23. Bridging the Length Scales, 4th U.S. National Congress of Computational Mechanics, San Francisco, CA, August 1997. (co-organizer J. Fish).
  24. Integrated Experimental-Computational Modeling of Advanced Materials, McNU’97, Summer Annual Meeting of ASME in 1997. (co-organizer R.E. Everett).
  25. Computational Methods in Micromechanics, ASME International Mechanical Engineering Congress and Exposition, November 1995. (co-organizer M. Ostoja-Starzewiskii).
  26. Computational Methods in Micromechanics, 3rd U.S. National Congress on Computational Mechanics, Dallas, TX, June 1995.
  27. Adaptive Finite Element Method in Industrial Forming Processes, First National Congress of Computational Mechanics, Chicago, July 1991.
[/panel] [/accordion]