Past MS Students

At Johns Hopkins University

  • S. Baby, 2015, Thesis Title: Homogenization Based CDM for Composites.
  • C. Tao, 2014, Thesis Title: Crystal Plasticity Based Finite Element Modeling in Polycrystalline Ti-7Al Alloys.
  • B. Leibowitz, 2014,Thesis Title: Method for Computing Motor Vehicle Crash Energy Based on Detailed Crush Data and Stiffness Values.

 

At The Ohio State University

  • E. Tedjaseputra, 2011, Thesis Title: NUmerical Simulations of Microstructure-Based Crystal Plasticity Finite Element Model for Titaniu, and Nickel Alloys.
  • J. Thomas, 2011, Thesis Title: Simulating the Mechanical Response of Titanium Alloys Through the Crystal Plasticity Finite Element Analysis of Imaged-Based Synthetic Microstructures, (Joined AltaSim Technologies, OH).
  • P. Dondeti, 2011, Thesis Title: Rate-Dependent Homogenization Baed Continuum Plasticity Damage Model for Dendritic Cast Aluminum Alloys, (Joined Cummins Engineering, IN).
  • J. Zhang, 2011, Thesis Title: Molecular Dynamics Simulations of Crack Propagation Behavior and Mechanisms in Nickel, (Joined Ph.D. in CE at JHU).
  • C. Alleman, 2011, Thesis Title:Molecular Dynamics Investigations of Polystyrene-Based Binary Thin Film SYstems: Interfacial Properties and Mechanical Behavior, (Joined Ph.D. in CE at JHU)
  • P. Gokulanandam, 2011, Thesis Title: Homogenization based Continuum Damage Mechanics Models for Composites under Monotonic and Cyclic Loading, (Joined SIMULIA, OH)
  • S. Behera, 2010, Thesis Title: Molecular Dynamics Simulations of Crack Evolution in Nickel, (Ph.D. student in ME at OSU)
  • K. Kirane, Autumn 2007,  Thesis Title: Grain Level Fatigue Crack Initiation Model Based on Crystal Plasticity Finite Element Analysis, (Joined Goodyear, OH)
  • S. Manchiraju, Summer 2007, Thesis Title: A Dual Time Scale Finite Element Model for Simulating Cyclic Deformation of Polycrystalline Alloys, (Pursuing a Ph.D. in MSE at OSU)
  • G. Venkatramani, Autumn 2006, Thesis Title: Grain Size Dependent Crystal Plasticity Finite Element Model for Deformation and Creep Studies In Polycrystalline Ti-6242, (Joined Goodyear, OH)
  • Y. Bhandari, Summer 2006, Thesis Title: CAD Based Simulation of Polycrystalline Microstructures Finite Element Mesh Generation from FIB Serial Sections, (Joined ABAQUS Inc.)
  • A. Tiwary, Summer 2005, Thesis Title: Numerical Conformal Mapping Methods for Arbitrary Shaped Heterogeneities in VCFEM, (Joined Siemens-Westinghouse, FL)
  • D. Deka, Summer 2005, Thesis Title: Crystal Plasticity Modeling of Deformation and Creep in Polycrystalline Ti-6242, (Joined Acteon Group’s Offshore Inc., TX)
  • S. Sinha, Summer 2005, Thesis Title: Experimental-Computational Approach to Life Prediction Based on Ratcheting Failure in HSLA Steels, (Joined ABAQUS West Inc., CA)
  • S. Swaminathan, 2004, Thesis Title: Statistically Equivalent Representative Volume Elements for Composite Microstructures, (Joined ABAQUS Inc., RI)
  • A. Khadke, 2003, Thesis Title: Numerical Simulations and Design of Shearing Process for Aluminum Alloys, (Joined Third Wave Inc., MN)
  • K. Ganapati, 2002, Thesis Title: Stress Analysis of a Canine Femur with a Prosthetic Stem, (Joined Vextec Corp., TN)
  • P. Eder, 2002, Thesis Title: High Performance Multi-level parallel Programming for Adaptive Multi-Scale Finite Element Modeling of Composite and Porous Structures, (Joined Altair Inc., OH)
  • V. Hasija, 2002, Thesis Title: Modeling Deformation and Creep in Ti-6Al alloys with Experimental Validation, (Joined GESAC Inc., MD)
  • J. Fan, 2000, Thesis Title: A Three-Dimensional Voronoi Cell Finite Element Method. For Linear Elasticity, (Joined SGI., MN)
  • Y. Ling, 2000, Thesis Title: Interfacial Debonding in Multi-fiber Polymer Matrix Composites by the Voronoi Cell Finite Element Method,  (Joined Taylormade Inc., CA)
  • M. Narasa, 1997, Thesis Title: Large Deformation Voronoi Cell Finite Element Analysis with Crystalline Plasticity, (Joined MARC Inc., CA)
  • S. Raju, 1995, Thesis Title: R-S Adapted Arbitrary Lagrangian-Eulerian Finite Element Method for Metal Forming Problems with Strain Localization, (Joined Hibbit Karlsson Sorensen Inc., RI)
  • Y. Liu, 1994, Thesis Title: Voronoi Cell Finite Element Method for Micropolar Thermoelastic Heterogeneous Materials.
  • T. Camino, 1993, Thesis Title: Use of the Finite Element Method in Design Optimization of Total Hip Arthroplasty
  • S.N. Mukhopadhyay, 1991, Thesis Title:  Analysis of Random Composites Using Voronoi Cell Finite Elements.
  • S.K. Manna, 1991, Thesis Title: An Adaptive Arbitrary Lagrangian Eulerian Finite Element Analysis of Metal Forming Problems.