- Md. Z. Alam, D. Eastman, G. Weber
**, S. Ghosh**and K. Hemker, “Microstructural Aspects of Fatigue Crack Initiation and Short Crack Growth in René 88DT”,*Proceedings of the 13th International Symposium of Superalloys,*Superalloys, pp.561-568, October 2016. DOI: 10.1002/9781119075646.ch60**.** - X. Zhang, Z. Li,
**S. Ghosh**and D. O’Brien, “Parametric Homogenization Based Continuum Damage Mechanics Model for Composites”,*Proceedings of the 31st Annual Technical Conference of the American Society for Composites,*pp. 384-398, DEStech Publications, Inc., Lancaster PA 17602-4967, USA, 2016. **S. Ghosh**and S. Keshavarz, “Multi-scale crystal plasticity FEM approach to modeling Nickel-based Superalloys”,*55th AIAA/ASME/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference: SciTech 2014,*January 2014, DOI: 10.2514/6.2014-0796**.**- D. Paquet and
**S. Ghosh**, “An adaptive multi-level model for multi-scale ductile fracture analysis in heterogeneous Aluminum alloys”,*XII International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS XII,*E. Onate, D.R.J. Owen, D. Peric and B. Suarez (eds), January 2013**.** **S. Ghosh**and M. Samal, “Physically motivated dislocation density-based multi-scale approach for constitutive modeling of Nickel based super-alloys”,*Proceedings of NSF CMMI Grantees Conference,*January 2011**.****S. Ghosh**, “Multi-time scaling image based crystal plasticity FE models dwell fatigue initiation in polycrystalline Ti alloys”,*Proceedings of the 1st World Congress on Integrated Computational Materials Engineering (ICME),*J. Allison, P. Collins, G. Spanos (eds.), The Minerals, Metals & Materials Society, pp. 113-119, 2011**.****S. Ghosh,**D. Paquet and P. Dondeti, “Microstructural effects on plastic deformation and fracture in dendritic cast Aluminum alloys”,*Proceedings of NSF CMMI Grantees Conference,*January 2011**.****S. Ghosh**,*Proceedings of 7*^{th}*EUROMECH Solid Mechanics Conference,*J. Ambrosio et. al. (eds.), 2009**.****S. Ghosh**and P. Chakraborty, “Modeling of dwell fatigue initiation in polycrystalline Ti alloys using multi-time scaling crystal plasticity FE models”,*Proceedings of 10*^{th}*International Conference on Computational Plasticity, COMPLAS X,*E. Onate and D.R.J. Owen (eds.), 2009.**S. Ghosh**,*Proceedings of 4th Multi-scale Materials Modeling Conference,*A. El-Azab (ed),**S. Ghosh**, V. Dakshinamurthy, C. Hu and J. Bai, “Multiscale characterization and multi-scale modeling of ductile fracture in cast Aluminum alloys”,*Proceedings of the NSF Grantees Conference*, 2008.**S. Ghosh**and S. Manchiraju, “Crystal plasticity models with multi-time scaling for cyclic deformation of polycrystalline metals”,*Proceedings of the Plasticity’07 Conference*, A. Khan (ed.), 2007.**S. Ghosh**, V. Dakshinamurthy and C. Hu, “Multiscale characterization and analysis of ductile fracture in cast Aluminum alloys”,*Proceedings of the Plasticity’07 Conference*, A. Khan (ed.), 2007.**S. Ghosh**, V. Dakshinamurthy and C. Hu, “Multiscale characterization and analysis of ductile fracture in cast Aluminum alloys” (Extended abstract),*Proceedings of the 17*^{th}*US Army Solid Mechanics Symposium*, B. Lamattina and R. Rajendran (eds.), 2007.**S. Ghosh**and S. Li, “Extended Voronoi cell FEM (X-VCFEM) for failure evolution in composites by debonding and matrix cracking” (Extended abstract),*Proceedings of the 17*^{th}*US Army Solid Mechanics Symposium*, B. Lamattina and R. Rajendran (eds.), 2007.- J. L. Volakis, K. Sertel and
**S. Ghosh**, “Multiphysics tools for load bearing antennas incorporating novel materials”, 2nd European Conference on Antennas and Propagation (EuCAP 2007), Edinburgh, UK, November 2007. **S. Ghosh**,**“**Micromechanical and macroscopic models of ductile fracture in particle reinforced Aluminum’’,*Proceedings of the International Congress on Computational Mechanics and Simulation*, D. Maiti and S.K. Dwivedi (eds.), IIT Guwahati Press, 2006.**S. Ghosh****“**Multi-time scale analysis of cyclic deformation in polycrystalline metals’’,*Proceedings of the 3rd Multi-scale Materials Modeling Conference*, P. Gumbsch (eds.), Freiburg, Germany, pp., 2006.- M. Groeber.
**S. Ghosh**,**“**Development of a robust 3D characterization-representation framework for modeling polycrystalline materials’’,*Proceedings of the 3rd Multi-scale Materials Modeling Conference*, P. Gumbsch (eds.), Freiburg, Germany, pp., 2006. **S. Ghosh****“**A wavelet based Voronoi cell FEM for crack evolution in composite materials”,*Proceedings of the 11*^{th}*International Congress on Fracture*, A. Carpinteri (eds.), Turin, Italy, pp. 4905-5001, 2005.**S. Ghosh,****“**Multiple scale modeling for deformation and failure of heterogeneous materials”,*Proceedings of the International Congress on Computational Mechanics and Simulation*, NGR Iyengar and A. Kumar (eds.), IIT Kanpur Press, pp. 43-56, 2004.**S. Ghosh****“**Modeling at the interface of mechanics and materials for composite and polycrystalline materials”,*Proceedings ICTACEM 2004; Third International Congress on Theoretical, Applied, Computational and Experimental Mechanics*, S. Bhattacharyya and S. Ghosh (eds.), IIT Kharagpur Press, pp. 10-11, 2004.- M. Asai and
**S. Ghosh****“**Multiple time scale modeling for cyclic deformation with crystal plasticity”,*Materials Processing and Design: Modeling, Simulation and Application Proceedings of NUMIFORM*, S. Ghosh, J. Castro and J.K. Lee (eds.), AIP Publishers, pp. 1725-1731, 2004. - M. Groeber, B. Haley, M. Uchic, and
**S. Ghosh**, “Microstructural characterization using 3-D orientation data collected by an automated FIB-EBSD system”,*Materials Processing and Design: Modeling, Simulation and Application Proceedings of NUMIFORM*, S. Ghosh, J. Castro and J.K. Lee (eds.), AIP Publishers, pp. 1712-1718, 2004. - C. Hu, S. Moorthy and
**S. Ghosh**, “A Voronoi cell finite element model for ductile damage in MMCs”,*Materials Processing and Design: Modeling, Simulation and Application Proceedings of NUMIFORM*, S. Ghosh, J. Castro and J.K. Lee (eds.), AIP Publishers, pp. 1893-1899, 2004. **S. Ghosh**and C. Xie,**“**Modeling cyclic deformation of HSLA steels using crystal plasticity”,*Materials Processing and Design: Modeling, Simulation and Application Proceedings of NUMIFORM*, S. Ghosh, J. Castro and J.K. Lee (eds.), AIP Publishers, pp 1717-1725, 2004.- P. Raghavan, J. Bai and
**S. Ghosh**, “Multi-scale model for damage analysis in fiber-reinforced composites with debonding”,*Materials Processing and Design: Modeling, Simulation and Application Proceedings of NUMIFORM*, S. Ghosh, J. Castro and J.K. Lee (eds.), AIP Publishers, pp. 1911-1917, 2004. - J. C. Williams and
**S. Ghosh**,*Proceedings of Thermec 2003, Materials Science Forum*, Vols. 426-432, TransTech Publications, Switzerland, pp. 4609-4616, 2003. - C.L. Xie, M. Groeber, R. Butler and
**S. Ghosh,**“Computational simulations of tensile and fatigue tests of HSLA steel based on experiments”,*Proceedings of SAE World Congress*, SP-1736, pp. 97-110, 2003. - A. Khadke, M. Lambert,
**S. Ghosh**and M. Li**,**“Experiments, material characterization and numerical simulations for modeling of the edge-shearing process for Aluminum alloys”,*Proceedings of NSF Design Grantees Conference,*January 2003. - D. Gardiner
**, S. Ghosh**and M. Li**,**“Numerical simulations and experiments on the cold rolling process for Aluminum alloys”,*Proceedings of NSF Design Grantees Conference,*January 2002. **S. Ghosh**and P. Raghavan**,**“An adaptive multilevel computational model for composite laminates”,*Proceedings of ICTACEM 2001*, Indian Institute of Technology, Kharagpur, India, December 2001.**S. Ghosh**and P. Raghavan**,**“An adaptive multilevel computational model for composite laminates”, Advances in Computational Engineering & Science,*Proceedings of International Conference on Computational Engineering Science,*S. N. Atluri (ed), 2001.- S. Yotte and
**S. Ghosh,**“PMMC cluster analysis’, modeling and simulation based engineering”,*Proceedings of International Conference on Computational Engineering Science*, S. N. Atluri (ed), 2001. **S. Ghosh**and Y. Ling, “A microstructure based computational model for interfacial debonding in fiber reinforced composites”,*Proceedings of SEM IX International Congress*, Orlando, FL, June 2000, pp. 65-68, 2000.- F. Susagna, S. Yotte, J. Riss, D. Breysse and
**S. Ghosh**, “Covariance and spatial distribution of particles in a metal matrix composite”,*Proceedings of MECAMAT 2000*, Centre De Morphologie Mathematique, Fontainebleau, France, 2000. - F. Susagna, S. Yotte, J. Riss, D. Breysse and
**S. Ghosh**, “La covariance appliquee a l’analyse de la distribution spatialle de particules”,*Proceedings of STERMAT 2000*, Sixth International Conference on Stereology and Image Analysis in Material Science, Krakow, Poland, 2000. - M. Li,
**S. Ghosh**, O. Richmond, H. Weiland and T.N. Rouns, “Dominant damage in particle reinforced Aluminum matrix composites”,*The Integration of Materials, Process and Product Design*, N. Zabaras, R. Becker,**S. Ghosh**, and L. Lalli (eds.), A.A. Balkema Publishers, Rotterdam, pp. 111-120, 1999. - Ch. PavanaChand and S
**. Ghosh**, “A 3D Voronoi cell finite element model for particulate reinforced composites”,*Modeling and Simulation Based Engineering*, S.N. Atluri and P.E. O’Donoghue (eds.), Tech Science Press, pp. 1450-1455, 1998. - K. Lee, S. Moorthy and
**S. Ghosh**, “Multiple scale computational model for damage in composite materials”,*Modeling and Simulation Based Engineering*, S.N. Atluri and P.E. O’Donoghue (eds.), Tech Science Press, pp. 1420-1425, 1998. - S. Moorthy and
**S. Ghosh**, “Damage modeling in heterogeneous materials by the Voronoi cell finite element method”,*Proceedings of 14th US Army Symposium on Solid Mechanics*, K.R. Iyer and S-C. Chou (eds.), Battelle Press, pp. 3651-370, 1997. **S. Ghosh**, “Multiple scale computational model for composite materials with microstructural damage”,*Multiple Scale Analyses and Coupled Physical Systems*, J. Salencon (ed.), Presses de lecole nationale des, pp. 263-274, 1997.**S. Ghosh**, S. Moorthy and K.H. Lee, “Multiple scale elastic-plastic analysis of heterogeneous materials with the Voronoi cell finite element method”,*Computational Methods in Micromechanics*,**S. Ghosh**and M. Ostoja-Starzewskii (eds.), AMD- Vol. 212, ASME, pp. 87-106, 1995.- S. Moorthy and
**S. Ghosh**, “Mesoscopic analysis of small deformation in heterogeneous materials using Voronoi cell finite element model”,*Computational Mechanics’ 95 Theory and Applications*, S. N. Atluri, G. Yagawa, and T. Cruse (eds.), pp. 1916-1921, 1995. - S. Raju and
**S. Ghosh**, “Adaptive arbitrary Lagrangian-Eulerian finite element method for metal forming problems”,*Computational Mechanics’ 95 Theory and Applications*, S. N. Atluri, G. Yagawa, and T. Cruse (eds.), pp. 1414-1419, 1995. - S. Roy,
**S. Ghosh**and R. Shivpuri, “FEM- micro genetic algorithm based approach to optimal design of multistage metal forming processes”,*NUMIFORM’95 Simulation of Materials Processing: Theory, Methods and Applications*, S.F. Shen and P. Dawson (eds.), Balkema Publishers, pp. 611-618, 1995. - S. Roy,
**S. Ghosh**and R. Shivpuri, “Micro genetic algorithms based approach to optimal design of multi-stage metal forming processes”,*Proceedings of the 1995 NSF Design and Manufacturing Grantees Conference*, Soc. of Manufacturing Engineers, pp. 573-574, 1995. - S. Moorthy,
**S. Ghosh**and Y.S. Liu, “Voronoi cell finite element model for random micropolar elastic-plastic heterogeneous media”,*Proceedings of 13th Army Symposium on Solid Mechanics*, S.C. Chou, F. D. Bartlett, T. W. Wright and K. Iyer (eds.), pp. 527-538, 1994. **S. Ghosh**and S. Moorthy, “A Voronoi cell finite element model for random heterogeneous media”,*Probabilities and Materials, Tests, Models and Applications, Proceedings of NATO Workshop PROBAMAT*, NATO ASI Series, Vol. 269, pp. 273-284, 1994.- R. Shivpuri, D. Damodaran, S
**. Ghosh**and S. Roy, “Computer aided approaches to improved quality in the extrusion of shapes and drawing of tubes”,*Proceedings of Tenth Annual World Tube Congress*, pp. 282-290 1994. **S. Ghosh**, “Adaptive arbitrary Lagrangian-Eulerian finite element method in metal forming simulation”,*MECAMAT’ 91 Large Plastic Deformations*, Balkema Publishers, pp. 415-424, 1993.**S. Ghosh**, “Heat transfer analysis of solidification processes by the Arbitrary Lagrangian-Eulerian finite element method”,*Computational Methods in Materials Processing*, MD- Vol. 39, ASME, pp. 159-170, 1992.**S. Ghosh**and S. Moorthy, “An arbitrary Lagrangian-Eulerian finite element model for heat transfer analysis of solidification processes”,*Numerical Methods In Industrial Processes*, 92 J.L. Chenot, R.D. Wood and O.C. Zienkiewicz (eds.), Balkema Publishers, pp. 805-882, 1992.**S. Ghosh**, “Finite deformation analysis involving contact of deformable bodies using the finite element method with arbitrary Lagrangian-Eulerian description”,*Computer Modeling and Simulation Of Manufacturing Processes*, MD- Vol.20, ASME, pp. 273-280, 1990.**S. Ghosh**, “A new finite element description for simulation of metal forming processes”,*NUMIFORM’89 Numerical Methods in Industrial Forming Processes*, E.G. Thompson, R.D. Wood, O.C. Zienkiewicz and A. Samuelsson (eds.), Balkema Publishers, pp. 157-163, 1989.